GPS-GSM Location Device Detector / Bluetooth GPS Tags + Microphones & Cameras Radio Frequency – Digital Display – Easy to Use - ScanTab Smartech [DS]

 Dedicated especially for detecting GPS tracking devices (GPS Trackers / Bluetooth GPS Tags). Of course, it can also detect spy microphones with transmission.
It is a multifunctional wireless signal detector, used to protect privacy and prevent information leaks.
It can detect not only the signal strength of broadband radio waves but also analyzes the MAC address of Bluetooth TAG trackers, automatically identifying the manufacturer corresponding to the MAC address and determining whether the detected MAC address belongs to a TAG tracker.
It can also accurately analyze the signal strength of detected Bluetooth devices, facilitating the rapid location of hidden TAG trackers.

 For surveillance equipment with intermittent transmission or in standby mode, this product allows recording the signal flow for 60 seconds and continuous monitoring for 24 hours of radio emissions in the environment, generating logs for later analysis in order to identify the signal activity pattern.

• Detection and analysis of radio waves in the 50MHz-6GHz range
• Automatic identification of manufacturer and brand via MAC address
• Automatic search and identification of Bluetooth TAG trackers
• Recording and playback of radio wave activity in the environment
• Radio signal intensity graph over 60 seconds

 Real-time detection
When the detector identifies the signal of a spy microphone, a tracker, or a Wi-Fi camera, the audio signal obtained after radio wave analysis is different.

Experienced users can identify the type of target signal source by analyzing the sound.

For example, a 2G tracker emits a pulsating sound similar to dripping water, a Wi-Fi signal sounds like a rainstorm, and the signal of an FM spy microphone will interrupt the detector’s sound, etc.

This function allows users to perform a complete analysis of invisible and intangible radio waves, making electromagnetic waves visible and audible.

 Recording/playback function
The recording/playback function is mainly used for detecting GPS trackers and various radio transmitting devices that are in standby or send signals periodically.

In this mode, the GPS signal activation time and regularity are analyzed.

It can also determine the approximate area in which the device is hidden and the approximate distance between the device and the detector based on signal strength.

The detector's detection range can be adjusted by changing the detection sensitivity.

By setting the cycle, the frequency with which the detector records the signal can be established.

For example, a GPS in standby mode will continue to operate for 1–3 minutes after switching from inactive to active mode.

If we set the detector to record every 5 seconds, this interval is sufficient to capture the GPS’s online activity.

TECHNICAL SUMMARY:

• Built-in rechargeable lithium-ion polymer battery 4.2V 1100mAh
• Charging voltage DC 5V
• Charging current 1A
• Standby current 140mA
• Weight: 185g including battery
• Engineering ABS plastic material
• Operating temperature -10℃ to 45℃

DETECTION PARAMETERS:

• Frequency range 50MHz to 6GHz
• Dynamic detection range -35dBm to 25dBm
• Broadband detection sensitivity ≤0.03mV @900MHz
• Broadband signal detection distance 10CM to 500CM
• Bluetooth TAG detection distance 3M to 20M

PACKAGE INCLUDES:
1 x GPS/TAG BT Detector
1 x Power Cable
1 x User Manual

The products presented and sold on this site are intended for home protection and property security, in compliance with applicable legislation.